PHBG PREPARATO
Carburetor Racing Type! New Model!
57 PIECES IN STOCK
In Stock! Fast Shipping!
Carburetor Dellorto PHBG 18mm tuned by Mondokart Racing for all 60cc engines Mini!
New version with screw-in ferrule, replaces the previous version which had lid closure with two screws, making the adjustment of the conical needle and the connection of the accelerator cable much faster. This version can be used in all leagues as the old version, with a two-lid closure, is no longer produced by Dellorto.
The proper function of a high performance 2-stroke powerplant depends on a perfectly cleaned and tuned carburetor. A carb is made up of many small passages and parts. A tiny piece of debris lodged in a jet or a tube can ruin a race.
Tuning consists in checking and eventually working all ducts are free of imperfections for maximum reliability and accuracy of carburetion, and air/fuel hydrodinamic optimization into passages.
A specific jets kit for the average outside temperature of use requested by the customer and the type of engine will also be mounted.
Is therefore necessary, at the end of the order, insert a note into the field containing the engine model on which you are going to assemble the carburettor and the average outdoor temperature at the time of use.
In the absence of note at the end of the order the carburetor will be calibrated to the temperature of 20 ° C IAME engines for Swift
Some categories may not allow the use of this carburetor
Piece 200 of the second picture (Group Aspiration Iame Swift 60cc Mini and Baby)
Processing times within 10 working days from receipt of the order.
Clicca qui per lasciare una recensione
Vortex mini 60 15 degres | |
Serre B. il giorno 04/9/2024 | Vortex mini 60 15 degres |
SRT Racing Team Andreas Lindberg | |
Andreas L. il giorno 07/2/2023 | TM mini 2, 25 degrees |
Réglage carburateur | |
André B. il giorno 12/29/2022 | Moteur Parilla IAME 60cc. Température 25 degés. |
TM Mini 2 25° | |
Patrick P. il giorno 06/17/2022 | TM Mini 2 25° |
Tm 60C mini | |
Veselin S. il giorno 06/24/2021 | Tm 60cc mini 28C |
PBHG 18 tuned | |
Rueben M. il giorno 05/20/2021 | We need this carburettor for the new Iame GR3 in our country is quite hot temp at the moment is already around 30 degrees and we need it for a good low end acceleration because our track is small track with short straight and technical part where we need acceleration and mid range . |
Rok mini -Motor | |
Zikos M. il giorno 07/20/2020 | Rok mini Motor |
Blueprint | |
Rob N. il giorno 10/27/2019 | This kind of blueprint makes really on the extreme all the 60cc, it is only necessary to send them the engine type via email |